Suffix EP TK 100 for Arts, Crafts & Castings up to 1cm 1,25kg (1A + 0.25B)


  • chrystal clear epoxy resin
  • can be coloured with pigments
  • Suitible for casting from 0.2cm up to 2 cm
  • can be used on all surfaces like wood, concrete and glass
  • mixing ration: Resin A and hardener B 100:25



Suffix EP TK 100 is 2 component transparent casting epoxy resin. Its crystal clear liquid and its designed to be used in decorative projects, tables, coffee tables and accessory materials.

Areas of Use

Decorative miscellaneous products, Tables, Coffe Tabes, ornaments, Ocean Waves and other castings up to 1 cm.


Its crystal clear, can be coloured with different pigments, its perfect for casting from 0.2mm up to 1 cm and can be used on all surfaces like wood, concrete and glass.

Technical Properties

  • Volume – 100%
  • Viscosity – 450 – 750
  • Density – 1070
  • Hardness (Shore D) – 82
  • Thermal Resistence – 75 °C
  • Mixing Ratio – 100:25
  • Curing Time – 12 hours
  • Full Curing – 2 days


To achieve perfect results, the mixing ration must be applied correctly. Changin the mixing ratio causes the surface ro not dry properly and not reach its full mechanical properties. Its essential to use scale while preparing the mixture.

The application surface must be solid. Ambient temperature should be 18-23 °C and humidity should be below 50%


25g of component B must be mixed with 100g of component A by weight. When weighing, component B should be weighted first and then component A should be added to it. To obtain a homogeneus mixture, the components must be mixed thoroughly at low speed for 3-4 minutes. The system tends to heat up in the container it is mixed in. Only the amount of product needed to be applied should be mixed. The maximum mixing amount is 500g of the product.

Storing and Shelf Life

It should kept tightly at room temperature, protected from sunlight. The Resin should be at 22-25 °C. Keeping the epoxy at lower temperatures causes crystallization and in this case a clear mixture cannot be obtained. If the Epoxy Temperature is below 10 °C, the temperature of the material should be carefully increased to 22-25 °C with a water bath in the container

It can be stored in its unopened original containers for 1 year from the date of production. Material in opened buckets should be used immediately.


(A+B) – 1m2 with 1mm tickness = 1.07 kg


There are no reviews yet.

Be the first to review “Suffix EP TK 100 for Arts, Crafts & Castings up to 1cm 1,25kg (1A + 0.25B)”

Your email address will not be published. Required fields are marked *

Shopping Basket